Hacking

This page is a stub! This page is a stub, meaning it is considered too short, incomplete and/or lacking information about the page's subject. You can help Delta-V by expanding it.

A skill that you can use to grant yourself illicit access to pieces of technology, or apply unintended side effects to pieces of technology.

Tools

The gear that you should probably prepare before hacking.

• Insulated Gloves - In order to not immediately get zapped. Hackables have power lines, and cutting/pulsing these without gloves can and will harm you. It's possible(?) to hack without them, but it will be slow, painful, and you'll need ointment.
• Screwdriver - In order to access the maintenance panel, you must first obtain a screwdriver. A necessary tool.
• Wirecutters - Allows you to cut and mend the wires, allowing for more long-term hacking. Can also reverse effects of the multitool.
• Multitool - Allows you to pulse the wires. Also very good for learning which wire does which. Needed to unbolt the door if the bolts go down.
• Crowbar - Allows you to forcibly open a door. Works when the power is out or you've hacked away the power.

Hacking

Multiple powered devices are hackable. Doors and vending machines are the most common to hack.
The process for starting to hack something is a very simple process:

1. Screwdriver in hand, click on the object to open its maintenance panel and expose the wiring.
2. With a multitool , wirecutters or empty hands, click on the object to access the wiring.
3. Pulse wires using the multitool or cut wires with the wirecutters .
4. Screwdriver the object again to shut its maintenance panel.

Remember, if you are trying to hack to get into unauthorised places or getting unauthorised objects you can potentially be sent to the brig, demoted, or even banned. If you are an Engineer, you may be asked by an authorised person to get into certain areas or get certain objects in an emergency situation but generally the right call (if you are not an antag) is to ask the relevant person first or the relevant Head of Staff.

Wires

The wires you see for a normal airlock door

In order to hack an object, you need to figure out what wire does what by pulsing it with a multitool or cutting it with a wirecutter. The wire cutters make a semi permanent change (but you can reverse it by repairing the broken wire). Multi Tool effects are temporary when the power is on (and the timer controls this).

Above each wire there is a light. The lights indicate whether each item is ON or OFF. If the lights are big circles it means that item is ON. A smaller light means that item is OFF. BUT, Signals passed my Links are not shown in the Hacking GUI: so the visual indicator of the state (size of circles) can lie, until the first cut wire or first pulse done inside the Hacking GUI.

To note is that all the wires for every objects are randomized at the start of the shift.

Hackables

Airlocks

Every types of airlocks is hackable. Normal airlock have 8 wires. Two of them go to power. 8 Wires: POWR_1, POWR_2, LOG, BOLT, BLIT, TIMR, SAFE, AIA.

High Security Doors follow the same logic as normal airlocks except they have additional steps to get the maintaince panel open.

Ouputs: Airlocks

DOOR STATUS (ON = Open, OFF = when finishes closing)

Inputs: Airlocks

• OPEN
• CLOSE
• TOGGLE
• HOLD
  • turns off automatic closing
• DOOR BOLT
  • ON = door gets bolted, sound "Pip-TuDu"
  • OFF = door gets unbolted, sound "Pup-TuDu"

Name	ON/TRUE State	OFF/FALSE State	Usage
POWR : Cycle Power	Door is turned in powered down state	Door is normal operation	Determines whether power is getting to the door. If the door is unpowered, you can open it with a crowbar unless the bolts are down. When power is supplied and the one of the two POWR wires are Restored: resets Door state to default except for the BOLT state. Without insulated gloves one can't cut these wire, as you just get shocked. CUTTING Both -> POWR: Door OFF REPAIRING -> POWR: Door On + Restart in default state PULSING -> POWR: Door OFF
LOG : Logging	normal operation	does not log people(?)	Something for Detectives.. CUTTING -> LOG: OFF State REPAIRING -> LOG: ON State PULSING -> LOG: OFF LOG
BOLT : Door's Bolt	door is set in a un-toggleable state until unbolted	normal operation	Controlling the door possibility to change state - Open/Closed. The door bolt "freezes" the door in the current state. In other words: the bolt keeps a door open or shut. CUTTING -> BOLT: TRUE REPAIRING -> - PULSING -> toggle BOLT state
BLIT : Bolt's Lights	normal operation	bolt lights will not come on if power is on	Controls the lights at the bortom of the door. CUTTING -> BLIT: OFF State REPAIRING -> BLIT: ON State PULSING -> toggle BLIT State
TIMR : Timer	normal operation, delay is present	the timer that automatically closes the door when the power is on will not activate	Normally the door will stay open after opening for a duration. If disabled the timer that automatically open or close the door when the power is on will not activate. The door will instead stay open or closed, but people can still open and close manually (unlike if the door was bolted). CUTTING -> TIMR: FALSE, minimal delay REPAIRING -> TIMR: TRUE, normal delay PULSING -> Blinking state of TIMR, normal delay
SAFE : Safety	normal operation	allows the door to close on a person, dealing high blunt damage	SAFE is the function that keeps the door open when somebody is standing in it. Only gets checked if the TIMR is still enabled. CUTTING -> SAFE: OFF REPAIRING -> SAFE: ON PULSING -> SAFE: OFF
AIA : AI Access	normal operation	no door control for AI(?)	CUTTING -> AIA: OFF REPAIRING -> AIA: ON PULSING -> -

Air Alarm

Station flooded with plasma and all of the Atmos Techs and CE are incompetent and/or dead? Best to take matters into your own hands. Air Alarms only have 3 wires, each going to one feature.

Ouputs: Air Alarm

None

Inputs: Air Alarm

None

Name	ON/TRUE State	OFF/FALSE State	Usage
POWR : Cycle Power	normal operation	Air Alarm is turned OFF	Determines whether power is getting to the air alarm. If the air alarm is unpowered, it's not going to do much. CUTTING -> POWR OFF REPAIRING -> POWR On + Restart in default state, this turns off the Fire Alarm PULSING -> POWR OFF
NETW : Network	normal operation	(Unknown)	CUTTING -> Network not working (?) REPAIRING -> Normal operation PULSING -> Alarm is Fired, even if POWR is cut
AIA : AI Access	normal operation	no Air Alarm control for AI (?)	CUTTING -> AIA: OFF REPAIRING -> AIA: ON PULSING -> -

Vending Machines

The only thing worth hacking. Vending machines have 7 wires. 2 wires can't be cut for some vending machines.

Ouputs: Vending Machines

None

Inputs: Vending Machines

None

Name	ON/TRUE State	OFF/FALSE State	Usage
POWR : Cycle Power	normal operation	Vending Machine is turned OFF	Determines whether power is getting to the vending machine. If the vending machine is unpowered, no one can buy from it. CUTTING -> POWR OFF REPAIRING -> POWR On + Restart in default state PULSING -> POWR OFF
ACC : Access control	normal operation, restricts access	normal operation, all access	Determines whether the vending machine checks for the appropriate access level of the person ID card. If you disable Access then anyone can access the vending machine and dispense items from it. CUTTING -> normal operation, all access REPAIRING -> normal operation, restricts access PULSING -> normal operation and all access, if last state was "restricts access" OR normal operation and restricts access after next "free" purchase, if last state was "all access"
LOG : Logging	normal operation	does not log crew actions (?)	Something for Detectives.. a data trail. CUTTING -> LOG: OFF REPAIRING -> LOG: On PULSING -> LOG: OFF
MNGR : Manager	Blinking, Normal operation. Contraband is hidden.	Contraband is visible	Toggles illegal/rare goods availability on/off. If the icon is blinking, it's toggled on. CUTTING -> MNGR: ON, no blinking REPAIRING -> MNGR: ON, blinking PULSING -> MNGR: OFF, no blinking
VEND : Vending	normal operation	Vending Machine can't vend	When pulsed, will make the machine dispense an item by firing in a random direction. CUTTING -> VEND: FALSE REPAIRING -> VEND: TRUE PULSING -> VEND pulses and sends an item flying
SPKR : Speaker	normal operation	quiet operation	Snipping the SPKR wire stops all speech from the vending machine. CUTTING -> SPKR: OFF REPAIRING -> SPKR: ON PULSING -> SPKR buzzes

File:Igniter.png Igniter

Small igniter, a fire starter. Creates a spark.

Ouputs: Vending Machines

None

Inputs: Vending Machines

• TRIGGERED

Remote Signaller

Remote signaller is a handheld device that can be linked electronicly to other devices to send a pulse. Can be linked to more than one device. Has only one button that creates the wireless output signal that is capable to travel 15 meters.

Ouputs: Remote Signaller

PRESSED

Inputs: Remote Signaller

None

File:Jukebox.png Jukebox

The music device to have if you are throwing a party, or you need a sound track for the unspeakable acts about to comence. Has 4 wires: 2 wires don't do anything.

Ouputs: Jukebox

None

Inputs: Jukebox

None

Name	ON/TRUE State	OFF/FALSE State	Usage
POWR : Cycle Power	Jukebox is turned OFF	normal operation	Determines whether power is getting to the Jukebox. CUTTING -> POWR: OFF REPAIRING -> POWR: On + Restart in default state PULSING -> POWR: OFF
SPKR : Speaker	normal operation	quiet operation	Snipping the SPKR wire stops all music. CUTTING -> SPKR: OFF REPAIRING -> SPKR: ON PULSING -> SPKR buzzes
AIA : AI Access	normal operation	no Jukebox music control for AI (?)	CUTTING -> AIA: OFF REPAIRING -> AIA: ON PULSING -> -

File:Arcade.png Arcade

Something to take the crew's mind off fleeting nature of life.

Ouputs: Arcade

None

Inputs: Arcade

None

Name	ON/TRUE State	OFF/FALSE State	Usage
POWR : Cycle Power	Arcade is turned OFF	normal operation	Determines whether power is getting to the Arcade. CUTTING -> POWR: OFF REPAIRING -> POWR: On + Restart in default state PULSING -> POWR: OFF
SPKR : Speaker	normal operation	quiet operation	Snipping the SPKR wire stops all music. CUTTING -> SPKR: OFF REPAIRING -> SPKR: ON PULSING -> SPKR buzzes
AIA : AI Access	normal operation	no Arcade gaming for AI (?)	CUTTING -> AIA: OFF REPAIRING -> AIA: ON PULSING -> -
LMYR : Unknown	Unknown	Unknown	Unknown CUTTING -> LMYR: Unknown REPAIRING -> LMYR: Unknown PULSING -> LMYR: Unknown
MNGR : Contraband Games (?)	Unknown	Unknown	Unknown CUTTING -> MNGR: Unknown REPAIRING -> MNGR: Unknown PULSING -> MNGR: Unknown

Intercom

Ouputs: Intercom

None

Inputs: Intercom

None

Name	ON/TRUE State	OFF/FALSE State	Usage
POWR : Cycle Power	Intercom is turned OFF	normal operation	Determines whether power is getting to the Intercom. CUTTING -> POWR: OFF REPAIRING -> POWR: On + Restart in default state PULSING -> POWR: OFF
SPKR : Speaker	normal operation	quiet operation	Snipping the SPKR wire stops all Radio output. CUTTING -> SPKR: OFF REPAIRING -> SPKR: ON PULSING -> SPKR buzzes
MIC : Microphone	normal operation	Dead microphone	Snipping the MIC wire stops all Radio input. CUTTING -> MIC: OFF REPAIRING -> MIC: ON PULSING -> (?)

File:Signal Button.png Signal Button

A button installed in the wall. It pulses only once when manualy pressed. It has no memory of previous state.

Ouputs: Signal Button

• PRESSED

Inputs: Signal Button

None

File:Signal Switch.png Signal Switch

A switch button installed in the wall. It pulses only once when manualy pressed. It has two possible states.

Ouputs: Signal Switch

• ON
  • High\ON signal if Switch Button is in state ON
• OFF
  • High\ON signal if Switch Button is in state OFF

STATUS

• • High\ON signal if Switch Button is in state ON
  • Low\OFF if Switch Button is in state OFF

Inputs: Signal Switch

None

File:Two way lever.png Two way lever

A lever installed in the floor. It pulses once when manually pulled. It has three possible states.

Ouputs: Two way lever

• LEFT
  • High\ON signal if lever is in the left state
• RIGHT
  • High\ON signal if lever is in the right state
• MIDDLE
  • High\ON signal if lever is in the middle state

Inputs: Two way lever

None

File:Signal Timer.png Signal Timer

A timer installed in the wall. It pulses once when it runs out and once on the start of the countdown.

Ouputs: Signal Timer

• TIMER START
  • High\ON when timer starts

TIMER TRIGGER

• • High\ON when timer ran out of time

Inputs: Signal Timer

• TRIGGER
  • controls the timer start

File:Lights.png Lights

Any light mounted on the station's structure. Has two states: emitting light and OFF.

Ouputs: Lights

None

Inputs: Lights

• ON
  • If signaled - turns the light on
• OFF
  • If signaled - turns the light off
• TOGGLE
  • If signaled - toggles the lights state

Tips

• When you shift click on an object, it will tell you whether the Panel is open or closed. If it is closed, you need a Screwdriver to open it.
• Using a crowbar on a powered door will give you a message "the powered motors block you efforts".
• If the bolts are down then the door will give you a message "the airlock bolts prevent it from being forced!".
• Remember to close the Panel when you're finished doing whatever it is you needed to do.